- Dwyer 2000-HA高精度MAGNEHELIC®微差压表
详细信息
品牌:DWYER 型号:2000-HA 加工定制:是 精度等级:1% 最大工作压力:100 MPa 外形尺寸:120 mm 适用范围:气体 量程范围:0-30 kPa Dwyer 2000 - HA 高精度MAGNEHELIC®微差压表
* 精度1% 。
* 镜像缩放叠加消除视差误差
* 六点校正证书
* IP67防护,全方位防护,可适合灰尘和浸水情况
* 可选耐腐蚀刷304 SS 边框
FEATURES/BENEFITS
• Accurate within 1%
• Mirrored scale overlay eliminates parallax error
• Six point calibration certificate included
• IP67 - Fully protects against dust and immersion
• Optional corrosion resistant brushed 304 SS bezel
APPLICATIONS
• Clean room positive pressure indication
• Filter monitoring
• Air velocity with Dwyer pitot tube
• Blower vacuum monitoring
• Fan pressure indication
• Duct, room, or building pressures
Note: Shown with optional -SS bezel
DESCRIPTION
The SERIES 2000-HA High Accuracy Magnehelic® Gage is twice as accurate as the standard Magnehelic® gage. The well-engineered High Accuracy Magnehelic® Gage offers a mirrored overlay as standard in order to eliminate any parallax error when taking measurements. A six point calibration certificate is included with each high accuracy model. The rugged IP67 casing helps fully protect against dust and water ingress. The redesigned corrosion resistant brushed 304 stainless steel bezel option offers a clean tapered design, yet minimizes the possibility of any dust accumulation on the edges.
SPECIFICATIONS
Service
Air and non-combustible, compatible gases (natural gas option available). Note: May be used with hydrogen.Order a Buna-N diaphragm. Pressures must be less than 35 psi.
WettedMaterials
Consult factory.
Housing
Die cast aluminum case and bezel with acrylic cover. Exterior finish is coated gray to withstand 168 hour saltspray corrosion test.
Accuracy
±1% FS (±1.5% on -0, -100PA, -125PA, -10MM and ±2% on -00, -60PA, -6MM ranges) throughout range at70°F (21.1°C).
Pressure Limits
-20 in Hg to 15 psig (-0.677 bar to 1.034 bar).
Overpressure
Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note oncatalog page.
Temperature Limits
20 to 140°F (-6.67 to 60°C).
Size
4" (101.6 mm) diameter dial face.
MountingOrientation
Diaphragm in vertical position. Consult factory for other position orientations.
ProcessConnections
1/8" female NPT duplicate high and low pressure taps – one pair side and one pair back.
Weight
1 lb 2 oz (510 g).
StandardAccessories
Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters, and threeflush mounting adapters with screws.
AgencyApprovals
Meets the technical requirements of EU Directive 2011/65/EU (RoHS II).
-